1. Forecasting company financial distress: c4.5 and adaboost adoption
Okfalisa, Elvia Budianita, Rezi Yuliani, Ladda Suanmali, Megawati, Hidayati Rusnedy, Saktioto

2. Financial feasibility analysis of cost and traffic volume: case study on toll road investment project
Mulyono Wraharjo, Betty Susanti, Edi Kadarsa

3. Design and development of natural-draft ethanol/lpg burner for heavy-duty cooking
Ativis Sirivichaikum, Usa Makmool Grare, Sumrerng Jugjai

4. Water vapor diffusion: a control factor in the selection of environmentally friendly waste sites in mosul city, iraq
Nabel K. Asmel, Abideen A. Ganiyu, Harith E. Ali, AlShaima Abdullah Al Saadi

5. Nanosized fe3o4/sio2 core-shells fabricated from natural sands, magnetic properties, and their application for dye adsorption
Munasir, Ahmad Taufiq, Ambarwati Teraningtyas, Diah Hari Kusumawati, Zainul Arifin Imam Supardi

6. Effects of drivers' speed during the yellow-light signal and satisfaction of drivers at the intersections with the red-light cameras
Phongphan Tankasem, Wuttikrai Chaipanha, Patiphan Kaewwichian, Jetsada Kumphong, Thanapol Promraksa, Thanyarat Sateinnam

7. Reduction and adsorption co-processes for selenate removal by zeolite-supported nanoscale zero-valent iron
Jakkapop Phanthasri, Dickson Y.S. Yan, Kitirote Wantala, Rattabal Khunphonoi, Visanu Tanboonchuy

8. Comparative study on path interval determinations in filleted end milling
Tsutomu Sekine, Kyoko Kameya

9. Removal of cationic dye from textile wastewater using treated bagasse fly ash: an industrial waste
Areeya Chumpiboon, Kananan Thongsubsai, Thanatporn Pongsiri, Jesper T.N. Knijnenburg, Yuvarat Ngernyen

10. Evaluation of factors influencing the maximum crack width of pumice and scoria lightweight concrete one-way slabs
Hendro Suseno, Agoes Soehardjono

11. Design and fabrication of a microfluidic device for separation of lymphocytes for use as part of a radiation biodosimeter
Jutima Yodyiumyuth, Witsaroot Sripumkhai, Norabadee Ranron, Pattaraluck Pattamang, Wanwisa Sudprasert

12. Investigation of concrete blocks mixed with recycled crumb rubber: a case study in thailand
Nuttawut Intaboot, Prachya Kanbua

13. Grain growth kinetics and hardness empirical model of 253 ma austenitic stainless steel after multi-pass cold rolling
Rana K. Melinia, Moch. Syaiful Anwar, Robert R. Wijaya, Eddy S. Siradj

14. A review on the influence of process parameters on powder metallurgy parts
Osarue Osaruene Edosa, Francis Kunzi Tekweme, Kapil Gupta

15. A quick review of the applications of artificial neural networks (ann) in the modelling of thermal systems
Daniel Raphael Ejike Ewim, Modestus O. Okwu, Ekene Jude Onyiriuka, Aasa Samson Abiodun, Sogo Mayokun Abolarin, Amr Kaood